• Easy to use
• Affordable
• Can integrate with your system (OEM use)
• Accuracy
• No batteries needed (powered by DTR signal of serial port)
• Temperature to RS232 conversion
• Use up to 2 probes with only 1 unit

• Keep track of temperatures in the basement or near the water pipes that might freeze in the winter.
• Monitor the temp in the attic to get an idea of how much heat you may be letting "escape" in the winter, or "letting in" during the summer months.
• Keep track of temps in your computer/equipment rooms and alarm when a temperature threshold is crossed.
• Keep track of temperatures in your manufacturing facility for historical purposes.
• Monitor & record the temp in your greenhouse. Use this information for historical analysis, future planning, and/or alarming when there's a problem.

• Accuracy: 0.5°F from -20°F to +120°F / 1.5°F from -40°F to +140°F
• Resolution: 0.1°
• Units: Fahrenheit
• Interface: RS232
• Protocol: ASCII, CR/LF delimited
• Power Source: Gets power from PC's DTR signal (no batteries needed).
• Current Drain: 12uA in power down, 2 mA when awake.
• Size: 3.5" by 2.125"
• Mounting: None
• Cable Length: 25 feet standard - longer lengths available upon request
• Weight: 2.5 ounces
• Operating System: Windows95/98/2000/NT/XP/Linux

Click here for more TempElert screens

For optimal use, combine the IT Temperature Monitor with the optional TempElert software for your PC. TempElert will send email or page alerts to make monitoring a variety of temperature controlled environments even more efficient. TempElert not only logs information from the IT Temp Monitor temperature probes, but can also be configured to send customizable alerts via email, alphanumeric pagers, cell phones and PDAs.

Plus, for mission critical PC and server room monitoring, the Powerbug program is included to enable network controlled shutdown of PC's or servers that would be affected by high temperature conditions.

Designed with a variety of users in mind, TempElert can be set up to relay data in a multitude of ways by delivering information from IT Temp Monitor's multiple switch and temperature probe capacity. The software automatically detects which type of unit you're using, and allows you to assign a desired temperature range (anywhere from -40° to 140° F) or switch setting to each probe in the program. From there, you can monitor temperature data and alerts for each individual probe-up to as many as 16 with the Model E16!

Temp Elert Features:

• Displays visual thermometer indicators, plus graphs of each probe
• At a glance visual annunciator shows alarm status onscreen
• Alarms and Cautions upper and lower limits can be set in the software
• Built in error checking and recovery, plus daily data logging to disk in plain text
• Audible alarm which can be turned on/off-- wave file is selectable from disk
• Customizable Alarm or Switch Status Box allows you to put your own image and wording in the alarm indicator box
• Displays in degrees F or C
• Ability to monitor a single unit from multiple locations; multiple iterations of the program can be polling the IT Temp Monitor Model E simultaneously
• TempElert can run external windows programs when alarms occur, such as a PC power shutdown routine; programs and batch file operations are supported
• Powerful free software feature included - PowerBug PC/server shutdown program which can shutdown one or multiple computers on your LAN
• Remote and local operation, also supports dialup Internet connections
• Fully configurable SMTP mail server settings including authentication if needed
• Can monitor 1 or 2 probe serial RS232 IT Temp Monitor Model F device or 4 or 16 probe Ethernet/internet readyTempTrax Model E